Connectors should be used to connect an appliance and equipment to the vertical chimney or vent, except were the chimney or vent is attached directly to the appliance. The vent connector should be as short as practical, and the appliance should be located as close as practical to the chimney or vent.

Circuit Breaker Panels

These are probably the most common type that home inspectors will come across, as they have replaced fuse panels over the last 40 years or so. As we saw for fuse panels, breakers are far from foolproof and require some particular checking.

Moisture

A crucial point to always bear in mind is that water can be a very good conductor of electricity. Any panel that is damp or wet should NOT be touched or opened by an inspector.