What Is Grounding?

Generally speaking, the difference between grounding and bonding is: Grounding is a direct connection to the earth to aid in removing damaging transient over-voltages due to lightning. The purpose of bonding is to ensure the electrical continuity of the fault current path, to provide the capacity and ability to conduct safely any fault current likely to be imposed, and to aid in the operation of the over-current protection device. Properly bonding all metal parts within an electrical system helps ensure a low-impedance fault current path.

Many roof problems are caused by issues with the framing and sheathing. In this section, we will focus on the defects that may be viewed from the exterior of the property. This is one of those cases where standing back and taking a good, hard look is better than getting "up close and personal" with the roof.