top of page


Automatic dampers
An automatic flue damper is an energy-saving device that closes off or restricts an appliance flue when the appliance is not operating...
Todd Engle
Dec 2, 20221 min read
47 views
0 comments


Fuel-Gas Venting systems sounds exciting
Connectors should be used to connect an appliance and equipment to the vertical chimney or vent, except were the chimney or vent is...
Todd Engle
Dec 1, 20221 min read
12 views
0 comments


Gas line connectors do's & don'ts
Flexible (semi-rigid) appliance fuel connectors are typically used with cooking ranges and clothes dryers where the gas connection is...
Todd Engle
Dec 1, 20222 min read
235 views
0 comments

Fuel Gas sediment traps
Most fuel-gas appliance manufacturers require the installation of a sediment trap. Sediment traps prevent debris from entering the gas...
Todd Engle
Dec 1, 20221 min read
7 views
0 comments


Pipe support sample picture is incorrect way
Piping should be supported to ensure alignment and to prevent sagging. Piping in the ground should be laid on a proper bed. Piping...
Todd Engle
Nov 21, 20221 min read
5 views
0 comments


PEX what is this stuff?
PEX Plastic Tubing PEX is polyethylene cross-linked plastic tubing. The cross-linked structure prevents the pipe from rupturing over a...
Todd Engle
Nov 16, 20222 min read
4 views
0 comments
bottom of page